2MP Outdoor Mini PTZ Dome Camera Product Image

2MP Outdoor Mini PTZ Dome Camera


Product Description

The 2MP Outdoor Mini PTZ Dome Camera from ACTi features a 4.9-49mm varifocal zoom lens, providing a 57.8° to 6.9° horizontal field of view and a 10x optical zoom. The camera can also be panned and tilted for additional adjustments, and these adjustments can be made through remote manual control, 256 preset points, 10 preset tours, or an auto scan function. With a 1/2.8" progressive-scan CMOS sensor, the camera captures images at a maximum resolution of 1920 x 1080 at 30 fps. It features a mechanical IR cut filter for true day/night functionality, automatically switching between color and B&W images for clear details. The camera uses both H.264 and MJPEG formatting for maximizing your storage and bandwidth, and a microSD slot allows for on-site recording with edge storage. Additionally, input and output terminal blocks provide 2-way audio capability.

The camera can detect motion in up to three programmable areas, and it will also set off an alarm if sound is detected. Once an alarm is triggered, the camera will send you an email with a snapshot of the situation or save a video of the incident to your local storage. There are four configurable privacy regions for customizing your field of view, and brightness, contrast, and sharpness settings allow you to configure your camera based on various environments. The RJ45 Ethernet connection uses PoE technology for a simple installation, and the camera can be surface, pendant, wall, corner, pole, flush, and gang box mounted for multiple setup options. ONVIF compliance enables compatibility with a wide range of surveillance devices, allowing you to connect the camera to an NVR for additional storage and management features.
Camera
Image Sensor 1/2.8" progressive-scan CMOS
Effective Pixels 2.43 MP: 1984 (H) x 1225 (V)
Horizontal Resolution 1450 TVL
Day/Night Yes
Low Light Sensitivity Superior
Minimum Illumination Color: 0.1 lux at f/1.8 (30 IRE, 2400 K)
B&W: 0.05 lux at f/1.8 (30 IRE, 2400 K)
Color to B/W Switch ISP based switch, configurable
Mechanical IR Cut Filter Yes
IR Sensitivity Range 700 to 1100 nm
Shutter Speed Manual Mode: 1/5 to 1/2,000 seconds
Auto Mode: 1/5 to 1/10,000 seconds
Signal to Noise Ratio 52 dB
Lens
Focal Length 4.9-49mm varifocal
Aperture f/1.8 to 3.0
Zoom 10x optical / Max: 2 seconds
Application: Installation, auto zoom by event, manual operation
Iris DC iris
Focus Auto
Horizontal Viewing Angle 57.8° to 6.9°
PTZ
Manual Panning Speed 0.1° to 190° / second
Manual Tilting Speed 0.1° to 150° / second
Preset Panning Speed 0.1° to 190° / second
Preset Tilting Speed 0.1° to 150° / second
Panning Range -175° to 175° (without auto flip)
Tilting Range 0° to 180° (with E-flip)
Control Remote manual control, 256 preset points, 10 preset tours, auto scan
Preset Panning Accuracy 1.5°
Preset Tilting Accuracy 1.5°
Absolute Position Yes
Protocol ACTi URL command, Sony VISCA, Pelco D, Pelco P
Video
Compression H.264 (Baseline / Main / High Profile), MJPEG
Maximum Frame Rate vs. Resolution 1920 x 1080 at 30 fps
1280 x 720 at 30 fps
800 x 600 at 30 fps
640 x 480 at 30 fps
320 x 240 at 15 fps
Streaming Simultaneous dual streams based on two configurations
Bit Rate 28 Kbps to 6 Mbps (per stream)
Bit Rate Mode Constant, variable
Privacy Masking 4 configurable regions for each of 17 preset points
Image Enhancement Basic WDR (75 dB)
White Balance: Automatic, hold, manual
Brightness, Contrast, Sharpness
Automatic gain control
2D + 3D digital noise reduction
Flickerless
Text Overlay User defined text on video
Image Orientation Image flip and mirror
Audio
Type 2-way
Compression 8 kHz, mono, PCM, 16 bit encoding, G.711
Input & Output Input: terminal block
Output: terminal block
Network
Network Protocol TCP, UDP, HTTP, HTTPS, DHCP, PPPoE, RTP, RTPS, IPv4 IPv6, DNS, DDNS, NTP, ICMP, ARP, IGMP, SMTP, FTP, UPnP, SNMP, Bonjour, Sony VISCA, Pelco D, Pelco P
Ethernet Port 1 x Ethernet (10/100 Base-T), RJ45 connection
Security IP address filtering, HTTPS encryption, password protected user levels, anonymous login, IEEE 802.1X network access control
Alarm
Alarm Trigger Video motion detection (3 regions), external device through digital input, sound detection
Alarm Response Notify control center, change camera settings, command other devices, email notification with snapshots, save video or snapshot to local storage, upload video or snapshot to FTP, activate external device through digital output
Interface
Digital Input/Output Input: 1 x terminal block
Output: 1 x terminal block
Storage microSDHC/SDXC memory card slot
Integration
Unified Solution Fully compatible with ACTi software
ISV Integration Software development Kit (SDK) available
ONVIF-compliant
GPS Position: Manual setting
Firmware Access Browser Microsoft Internet Explorer 8.0 or newer (full functionality)
Safari with QuickTime installed, and other browsers with VLC installed (partial functionality)
General
Power Source PoE Class 3 (IEEE 802.3af)
12 VDC
Power Consumption PoE: 11.2 W (built-in heater and fan on)
12 VDC: 7.8 W(built-in heater and fan on)
Environmental Casing Weatherproof (IP67-rated)
Vandal Proof (IK10-rated)
Transparent Dome cover
Mount Surface, pendant, wall, corner, pole, flush, gang box
Starting Temperature -22 to 122°F / -30 to 50°C
Operating Temperature -40 to 122°F / -40 to 50°C
Operating Humidity 10 to 85% RH
Approvals CE (EN 55022 Class B, EN 55024), FCC (Part15 Subpart B Class B), NEMA 4X, UL (for optional PoE injector)
Dimensions 6.0 x 4.6" / 15.2 x 11.7 cm
Weight 2.8 lb / 1.3 kg