CLUB PRO+ TWS Noise-Canceling True Wireless In-Ear Headphones
Product Description
Listen and talk in nearly any situation with the CLUB PRO+ TWS Noise-Canceling True Wireless In-Ear Headphones from JBL. Featuring active noise cancellation technology, the earbuds can filter out ambient sounds, so you can listen to your favorite music or podcast in noisy environments. When paired with a smartphone, you can make hands-free calls via three built-in microphones. Combined with beamforming technology that focuses on your voice, the microphones are designed to let you be heard clearly, even outside on a windy day.
On a full charge, the CLUB PRO+ TWS headphones can last all day with up to 8 hours of battery life. The included charging case has its own battery and can provide an additional 24 hours of power. To charge the earbuds, simply slip them into the case and close the lid. Once you flip the lid open, the CLUB PRO+ TWS headphones will automatically pair with the last known mobile device thanks to Dual Connect + Sync technology. You also gain the freedom of using just one earbud if you'd like, as all functionality is possible with either earbud.
On a full charge, the CLUB PRO+ TWS headphones can last all day with up to 8 hours of battery life. The included charging case has its own battery and can provide an additional 24 hours of power. To charge the earbuds, simply slip them into the case and close the lid. Once you flip the lid open, the CLUB PRO+ TWS headphones will automatically pair with the last known mobile device thanks to Dual Connect + Sync technology. You also gain the freedom of using just one earbud if you'd like, as all functionality is possible with either earbud.
| Item Type | |
| Number of Included Headphones/Receivers | |
| Number of Included Transmitters | |
| Number of Included Headsets | |
| Number of Included Transceivers | |
| Headphone | |
| Earpiece Design | In-Ear (Intra-Aural) |
| Earpiece Swivel | |
| Earpiece Connection / Wearing Style | |
| Foldable | |
| Number of Earpieces | |
| Sound Field | |
| Earpad Size | |
| Driver Type | Dynamic |
| Number of Drivers | |
| Driver Size | 0.3" / 6.8 mm |
| Diaphragm | |
| Magnet Type | |
| Voice Coil | |
| Impedance | 16 Ohms |
| Active Noise Cancellation | Yes |
| Controls/Microphone Location | Controls: Earpiece (Side Unspecified) Microphone: Earpiece (Side Unspecified) |
| Full Remote OS Support | Not Specified by Manufacturer |
| Sensors | |
| Contact Pressure | |
| Performance | |
| Frequency Response | 10 Hz to 20 kHz (Wireless) |
| Resonant Frequency | |
| Sensitivity | 102 dB SPL at 1 kHz / 1 mW |
| Matching Tolerance | |
| Maximum Sound Pressure Level (SPL) | 99 dB |
| Maximum Power Handling | |
| Functional Bias Voltage | |
| Electrostatic Capacitance | |
| Output Power | |
| Volume Limiting | |
| Noise Attenuation | |
| Total Harmonic Distortion (THD) | |
| SNR | |
| CMRR | |
| Channel Separation | |
| Storage Capacity | |
| Microphone | |
| Number of Mics | 3 |
| Beamforming Support | Yes |
| Type | |
| Diaphragm Size | |
| Mic Boom Location | |
| Pickup Pattern | |
| Noise Canceling | |
| Frequency Response | |
| Operating Voltage | |
| Sensitivity | -6 dB at 1 kHz |
| Maximum SPL | |
| Impedance | |
| SNR | |
| Distortion | |
| Equivalent Noise Level | |
| Wireless Connectivity | |
| Wireless Transmission | |
| Number of RF Channels | |
| RF Bandwidth | |
| Max Systems per Setup | |
| Wireless Modulation | Bluetooth: π/4 DQPSK, 8DPSK, GFSK |
| DECT Standard | |
| Duplex Mode | |
| RF Channel Access Method | |
| Latency | |
| Speech Encoding | |
| Transmission Speed | |
| Approximate RF Sensitivity | |
| Supported Audio Codecs | |
| Bluetooth Profiles | A2DP 1.3, AVRCP 1.6, HFP 1.7 |
| Bluetooth | 5.1 |
| Bluetooth Power Class | |
| Wireless Range | |
| Frequency | Bluetooth: 2.4 GHz (2400 to 2483.5 MHz) |
| Transmitter Power | 9.5 dBm |
| Multipoint Support | |
| Maximum Paired Devices | |
| NFC | |
| Wireless Chipset | |
| Transmitter Host Connection | |
| Encryption | |
| Audio Connector to Source | |
| Connector Plating | |
| Adapter (Included) | |
| Cable Design | |
| Audio Connector to Earpiece | |
| Cable Length | |
| Cable Length | |
| Cable Color | |
| Cable Conductor Material | |
| Battery | |
| Battery Type | |
| Battery Type | |
| Battery Chemistry | Lithium-Ion Polymer (LiPo) |
| Battery Chemistry | |
| Capacity (mAh) | 55 mAh |
| Runtime | 6 Hours (BT+ANC) 8 Hours (BT) |
| Runtime | |
| Quick Charging Times | 10 Minutes for 1 Hour |
| Recharge Time | |
| DC Input Power | 5 VDC at 1 A |
| Wireless Charging | |
| Charging Port | Pins |
| Charging Cable Length | |
| Number of Channels | |
| Users per System | |
| I/O Connectors | |
| Antenna | |
| Audio Decoding | |
| Number of Charging Ports | |
| AC/DC Power Adapter | |
| AC Input Power | |
| Power Consumption | |
| Charging Case | |
| Additional Runtime | 24 Hours |
| Battery Chemistry | Lithium-Ion Polymer (LiPo) |
| Capacity | 660 mAh |
| Charging Time | 2 Hours |
| Charging Interface | USB Type-C, Qi |
| Platform Support | |
| OS Compatibility | |
| Required Hardware | |
| Internet Connection | |
| Environmental | |
| Charging Temperature | |
| Operating Temperature | 113°F / 45°C |
| Storage Temperature | |
| Operating Humidity | |
| Storage Humidity | |
| Certifications | |
| Physical | |
| Color | |
| Water Resistance | |
| IP Rating | |
| LED Indicator | |
| Material of Construction | |
| Dimensions | |
| Weight | Headphones: 0.2 oz / 6.8 g (Each) Charging Case: 2 oz / 55.4 g |
| Warranty Length | Limited 1-Year Warranty |