AN-1000X+ Speaker Monitor
Product Description
The Anchor Audio AN-1000X+ Speaker Monitor is a powered monitor with a variety of input and output options designed to work in a number of different settings. With inputs including a mic or line-level switchable female XLR, RCA, or Hi-Z 1/4", the AN-1000X+ can easily be used in an A/V rack, as a studio monitor, or for live sound. Both the RCA and 1/4" line inputs can be used simultaneously.
By using the RCA line input and output, the AN-1000X+ can be daisy chained to other AN-1000X+ units to provide greater amplification as needed. The speaker output allows you to power an unpowered auxiliary speaker, such as the Anchor Audio AN-1001X+.
By using the RCA line input and output, the AN-1000X+ can be daisy chained to other AN-1000X+ units to provide greater amplification as needed. The speaker output allows you to power an unpowered auxiliary speaker, such as the Anchor Audio AN-1001X+.
| Portable PA System | |
| Speaker Configuration | 1 x 2-Way Loudspeaker |
| Number of Input Channels | 3 (3 x Mono) |
| Amplifier Power Rating | 50 W RMS (at 4 Ohms) |
| Amplifier Class | |
| Impedance | |
| Speakers | |
| Enclosure Type | |
| Full-Range Driver | |
| Full-Range Driver (Oval) | |
| HF Driver | 0.4" / 10 mm Dome Tweeter |
| HF Voice Coil | |
| MF Driver | |
| MF Voice Coil | |
| LF Driver | 4.5" / 11.4 cm Woofer |
| LF Voice Coil | |
| Subwoofer Driver | |
| Subwoofer Voice Coil | |
| Magnet | |
| Speaker Sensitivity | |
| Signal Processing | |
| Crossover | |
| Input Pad | None |
| EQ | |
| Semi-Parametric EQ | |
| Effects | None |
| DSP | |
| Filters | |
| Dynamic Processing | |
| Form Factor | |
| Capsule | |
| Polar Pattern | |
| Output Connector | |
| Operating Voltage | |
| Microphone Sensitivity | |
| Muting | |
| Performance | |
| Frequency Response | 65 Hz to 20 kHz ±3 dB |
| Frequency Range | |
| Maximum SPL | 107 dB |
| Max Coverage Distance | |
| Max Coverage Area | |
| Coverage Angle | |
| Coverage Angle | |
| Input Sensitivity | |
| Gain Range | |
| Max Input Level | |
| I/O Impedance | |
| SNR | |
| THD | |
| Dynamic Range | |
| Protections | |
| Connectivity | |
| Audio I/O | 1 x XLR 3-Pin Female Balanced Mic/Line Input 1 x 1/4" TS Line/Hi-Z Input 1 x RCA TS Line Input 1 x RCA TS Line Output 1 x 1/4" TS Speaker Output |
| Phantom Power | |
| USB | |
| Media Playback | |
| Media & File Formats Supported | |
| Network I/O | |
| Wireless Connectivity | |
| Wireless | |
| Wireless Transmission | |
| Max Wireless Range | |
| Number of RF Channels | |
| RF Frequency Band | |
| RF Bandwidth | |
| Form Factor | Receiver: Built-In |
| RF Output Power | |
| Transmitter I/O | |
| Max Number of Simultaneous Transmitters | |
| Diversity | |
| Antenna | |
| Squelch | |
| Approximate RF Sensitivity | |
| Deviation | |
| Modulation | |
| RF Channel Crosstalk | |
| Spurious | |
| Bluetooth | |
| Bluetooth Profiles | |
| Pairing | |
| Bluetooth Channel | |
| Frequency | |
| Bluetooth Power Class | |
| Bluetooth Input Gain | |
| Transmitter Power | |
| Bluetooth Range | |
| Power | |
| Battery Type | |
| Approximate Battery Life | |
| Battery Charging Time | |
| Internal Battery Capacity | |
| Battery Cycle Count | |
| AC Input Power | 110 to 125 VAC, 50 / 60 Hz |
| Power Supply Output | |
| Current Consumption | |
| Power Consumption | 50 W (Max) |
| DC Input Power | |
| AC Power Connector | IEC Input |
| Physical | |
| Cable Length | |
| Transport Options | |
| Mounting | |
| Stand Height | |
| Stand Load Capacity | |
| Cooling | |
| Construction Material | |
| IP Rating | |
| Operating Temperature | |
| Storage Temperature | |
| Operating Humidity | |
| Certifications | |
| Dimensions | 9 x 8 x 5.5" / 228.6 x 203.2 x 139.7 mm |
| Weight | 6.5 lb / 2.9 kg |
| Warranty Length |