5MP Outdoor Bullet Camera Product Image

5MP Outdoor Bullet Camera


Product Description

The 5MP Outdoor Bullet Camera from ACTi utilizes a 1/3.2" progressive-scan CMOS sensor to capture video in 2592 x 1944 resolution at 15 fps, and it features a 4.2mm lens for a 62.7° horizontal field of view. Twenty integrated IR LEDs enable the camera to capture video at a distance of up to 98.4', even in complete darkness. Additionally, WDR, white balance, automatic gain control, and digital noise reduction enable the camera to capture clear images in ambient lighting. H.264 and MJPEG formatting maximizes your storage and bandwidth usage, and a microSD slot supports microSD cards for on-site recording and edge storage. Additionally, PoE technology enables you to setup the camera using just one RJ45 cable, simplifying your installation process.

The camera can be programmed to set off an alarm when motion is detected in any of three configurable zones. Once an alarm is triggered, the camera will send you an email with a snapshot of the situation or save a video of the incident to your FTP server. There are four configurable privacy regions for customizing your field of view, and brightness, contrast, and sharpness settings allow you to configure your camera based on various environments. The camera is ONVIF compliant, enabling compatibility with a variety of other surveillance devices, and its IP68-rated weatherproof and IK10-rated vandal-proof metal enclosure enables the camera to be installed outdoors and in high-risk areas.
Image Sensor 1/3.2" progressive-scan CMOS
Effective Pixels 5.04 MP: 2592 (H) x 1944 (V)
Horizontal Resolution 1350 TVL
Day/Night Yes
Low Light Sensitivity Standard
Minimum Illumination Color: 0.1 lux at f/1.8 (30 IRE, 2400 K)
B/W: 0 lux (IR LED on)
Color to B/W switch Configurable ISP-based switch
Mechanical IR Cut Filter Yes
IR Sensitivity Range 700 to 1100 nm
IR LED Adaptive IR LED x 20 (850 nm)
IR Working Distance 98.4' / 30.0 m (0 lux, 30 IRE, Gain 255, Auto shutter mode)
Electronic Shutter Manual Mode: 1/5 to 1/2,000 seconds
Auto Mode: 1/5 to 1/10,000 seconds
Signal to Noise Ratio 52 dB
Lens
Focal Length 4.2mm fixed
Aperture f/1.8
Iris Fixed
Focus Fixed
Lens Mount Board
Horizontal Viewing Angle 62.7°
Video
Compression H.264 (Baseline / Main / High Profile), MJPEG
Maximum Frame Rate vs. Resolution 2592 x 1944 at 15 fps
2048 x 1546 at 15 fps
1920 x 1080 at 30 fps
1280 x 720 at 30 fps
800 x 600 at 30 fps
640 x 480 at 30 fps
320 x 240 at 15 fps
Multi-Streaming Simultaneous dual steams based on 2 configurations
Bit Rate 28 kb/s to 6 Mb/s (per stream)
Bit Rate Mode Constant, variable
Image Enhancement Basic WDR (74 dB)
White balance (automatic, hold, manual)
Brightness, Contrast, Sharpness (auto)
Automatic gain control
Digital noise reduction
Flickerless
Privacy Mask Type 4 configurable regions
Text Overlay User-defined text on video
Image Orientation Image flip and mirror
Network
Protocol TCP, UDP, HTTP, HTTPS, DHCP, PPPoE, RTP, RTSP, IPv4, IPv6, DNS, DDNS, NTP, ICMP, ARP, IGMP, SMTP, FTP, UPnP, SNMP, Bonjour
Ethernet Port 1 x Ethernet (10/100 Base-T), RJ-45 connector
Security IP address filtering, HTTPS encryption, password-protected user levels, anonymous login, IEEE 802.1X network access control
Alarm
Alarm Triggers Video motion detection (3 regions)
Alarm Response Notify control center, change camera settings, command other devices, email notifications with snapshots, upload video or snapshot to FTP
Interface
Local Storage microSDHC/SDXC memory card slot
Integration
Unified Solution Fully compatible with ACTi software
ISV Integration Software Development Kit (SDK) available
ONVIF-compliant
GPS Positioning: manual setting
Firmware Access Browser Microsoft Internet Explorer 8.0 or newer (full functionality)
Safari with QuickTime installed and other browsers with VLC installed (partial functionality)
General
Power Source PoE Class 2 (IEEE802.3af)
Power Consumption 4.8 W (IR on)
Environmental Casing Weatherproof (IP68-rated)
Vandal proof (IK10-rated)
Mount Type Wall, ceiling, corner, pole
Starting Temperature -4 to 122°F (-20 to 50°C)
Operating Temperature -40 to 122°F (-40 to 50°C)
Operating Humidity 10 to 85% RH
Approvals CE (EN 55022 Class B, EN 55024), FCC (Part15 Subpart B Class B), NEMA 4X, UL (for optional PoE injector and power adapter)
Dimensions (Ø x H) 3.0 x 7.5" (7.7 x 19.0 cm)
Weight 1.3 lb (704 g)