A-S801 Integrated Amplifier (Silver) Product Image

A-S801 Integrated Amplifier (Silver)


Product Description

Expand your listening horizons with the silver A-S801 Integrated Amplifier from Yamaha. Featuring up to 120W per channel of RMS power at 6 ohms, this amp is equipped with digital inputs for connecting devices like televisions and Blu-ray/DVD players. The A-S801 sports a USB input and a 32-bit ESS Sabre Premier Audio digital-to-analog converter for playing DSD and PCM files stored on your PC. This amplifier offers dual stereo outputs, giving you the ability to power two sets of speakers in different rooms and switch between them, or have them both playing at the same time. To increase the bass output of your sound system, there's also a terminal for connecting a subwoofer.

To reduce distortion and degradation and produce the cleanest possible sound, the A-S801 employs Pure Direct mode and CD Direct mode. Activated via buttons on the front of the unit, these modes cause input signals to bypass unused circuits and cuts off those circuits' power supply. To further ensure quality sound, the amplifier's continuously variable loudness control allows you to balance low and high frequency sounds so you can hear a full tonal range at any volume.

Built to be energy efficient, the amp uses a power management system to switch itself to idle mode when not in use. The A-S801's internal circuitry mirrors itself symmetrically to produce higher signal purity and lower degradation. The chassis is reinforced with a solid center bar to reduce vibration and features a brushed aluminum front panel and knobs. The system comes with a remote control for easy operation.
Amplifier
Amplifier Type Integrated Amplifier (Preamp/Power Amp Combo)
Channels 2.0
Number of Subwoofer Channels
Amplifier Class
Power Output per Channel 120 W at 6 Ohms / 20 Hz to 20 kHz / 0.038% THD (RMS)
100 W at 8 Ohms / 20 Hz to 20 kHz / 0.019% THD (RMS)
Dynamic Power per Channel 140 W at 8 Ohms
170 W at 6 Ohms
220 W at 4 Ohms
290 W at 2 Ohms
Frequency Response 20 Hz to 20 kHz �0.5 dB (Pure Direct Mode)
10 Hz to 100 kHz �1 dB
THD+N
THD
Residual Output Noise 40 µV (IHF-A)
Channel Separation
Speaker Impedance
Tone Control Bass (20 Hz): ±10.0 dB
Treble (20 kHz): ±10.0 dB
Damping Factor ≥ 240 (8 Ohms, 1 kHz)
Audio Processing
DTS Compatibility
Dolby Compatibility
Auro 3D Support
Upmixing Technology
Supported File Formats PCM via USB/Optical TOSLINK/Digital Coaxial
DSD via USB
Supported Sample Rates Up to 384 kHz (PCM)
Up to 5.6 MHz (DSD)
DAC 384 kHz / 32-Bit
HDR Compatibility
Pass-Through Support
Upscaling
GUI
Connectivity
Rear A/V Inputs 5 x Stereo RCA
1 x Stereo RCA (Phono) with Ground Screw
1 x Optical TOSLINK
1 x Digital Coaxial
Rear A/V Outputs 2 x Stereo RCA
1 x RCA Subwoofer
Front I/O 1 x 1/4" / 6.35 mm Headphone Output
Headphone Output Power
Other Rear I/O 1 x USB Type-A (Power)
Speaker Connectors 4 x Binding Post Pair
4 x Gold-Plated Binding Post Pair
HDCP Support
HDMI Compression Modes
Audio Return Channel (ARC)
HDMI CEC
Media Card Slot
A/B Speaker Selection
Bi-Amp Capability
Input Impedance Phono (MM): 47 Kilohms
Line: 47 Kilohms
Input Sensitivity Phono (MM): 3 mV
Line: 200 mV
Max Input Level Phono (MM): ≥ 45 mV (1 kHz / 0.03% THD)
Line: ≥ 2.2 V (1 kHz / 0.03% THD)
Phono RIAA EQ Deviation ±0.5 dB
Rated Output / Impedance Headphone: 470 mV / 470 Ohms
Line: 200 mV / 1 Kilohms
Subwoofer: 3.5 V / 1.2 Kilohms
Dynamic Range
Signal to Noise Ratio Phono (MM): ≥ 82 dB (Input Shorted)
Line: ≥ 99 dB (Input Shorted / Direct Mode)
Total Harmonic Distortion (THD) Phono (MM) to Line Out: ≤ 0.03% (20 Hz to 20 kHz, 2.5 V Input)
Line to Speaker Out: ≤ 0.019% (20 Hz to 20 kHz, 45 W Output, 8 Ohms)
Channel Separation Line, Phono, RCA:
≥ 65 dB (5.1-Kilohm Input Shorted / 1 kHz)
≥ 50 dB (5.1-Kilohm Input Shorted / 10 kHz)
Crosstalk
Wireless Connectivity
Wi-Fi None
Wireless Security
Bluetooth None
Bluetooth Profiles
Supported Audio Codecs
Bluetooth Range
Wireless Audio Protocols
DLNA Support
External Control Support
Virtual Assistant Support
Tuner Type
Number of Tuner Presets
Radio Frequencies
Sensitivity
Signal to Noise Ratio
Distortion
Power
AC Input Power 120 VAC, 60 Hz
AC Power Output
Power Consumption Active: 270 W
Standby: 0.5 W
Physical
Dimensions (W x H x D) 17.1 x 6.0 x 15.2" / 43.5 x 15.2 x 38.7 cm
Weight 26.7 lb / 12.1 kg
Warranty Length