5MP Cube Camera Product Image

5MP Cube Camera


Product Description

The 5MP Cube Camera from ACTi utilizes a 2.8mm fixed lens for a 92.6° horizontal field of view, providing a wide coverage area. With a 1/3.2" progressive-scan CMOS sensor, the camera features a maximum resolution of 2592 x 1944 at 15 fps. Wide dynamic range, white balance, auto gain control, and digital noise reduction features enable you to capture clear images in ambient lighting. The camera uses both H.264 and MJPEG formatting for maximizing your storage and bandwidth, and a microSD slot allows for on-site recording with edge storage. Additionally, a built-in microphone and a 3.5mm jack output offer 2-way audio capability.

You can program the camera to trigger an alarm when motion is detected in up to three programmable zones within your field of view. Once an alarm is triggered, the camera will send you an email with a snapshot of the situation or save a video of the incident to your local storage. Furthermore, there are four configurable privacy zones, allowing you to customize your field of view. The RJ45 Ethernet connection uses PoE technology for a simple installation, and the camera can be wall or ceiling mounted for multiple setup options. ONVIF compliance enables compatibility with a wide range of surveillance devices, allowing you to connect the camera to an NVR for additional storage and management features.
Camera
Image Sensor 1/3.2" progressive-scan CMOS
Minimum Illumination Color: 0.1 lux at f/2.0 (30 IRE, 2400 K)
Shutter Speed Manual Mode: 1/5 to 1/2,000 seconds
Auto Mode: 1/5 to 1/10,000 seconds
Horizontal Resolution 1350 TVL
S/N Ratio 52 dB
Lens
Lens 2.8mm fixed
Aperture f/2.0
Iris Fixed
Focus Manual
Lens Mount CS Mount (interchangeable lens)
Horizontal Viewing Angle 92.6°
Video
Compression H.264 HP, MJPEG
Maximum Frame Rate 2592 x 1944 at 15 fps
2048 x 1536 at 15 fps
1920 x 1080 at 30 fps
1280 x 720 at 30 fps
800 x 600 at 30 fps
640 x 480 at 30 fps
320 x 240 at 15 fps
Multi-Streaming Simultaneous dual streams based on two configurations
Bit Rate 28 Kbps to 6 Mbps (per steam)
Bit Rate Mode Constant, variable
Image Enhancement Basic WDR (74 dB)
White Balance: Automatic, hold, and manual
Brightness, Contrast, Sharpness (auto)
Automatic gain control
2D + 3D Digital noise reduction
Flickerless
Privacy Masking 4 configurable regions
Text Overlay User defined text on video
Image Orientation Image flip and mirror
Audio
Compression 8 kHz, mono, PCM, 16 bit encoding, G.711
Input Built-in microphone
Output 3.5mm phone jack
Network
Protocol TCP, UDP, HTTP, HTTPS, DHCP, PPPoE, RTP, RTSP, IPv4, IPv6, DNS, DDNS, NTP, ICMP, ARP, IGMP, SMTP, FTP, UPnP, SNMP, Bonjour
Network Connectors 1 x Ethernet (10/100 Base-T), RJ45 connector
Security IP address filtering, HTTPS encryption, password protected user levels, anonymous login, IEEE 802.1X network access control
Alarm
Alarm Trigger Video motion detection (3 regions), Sound detection
Alarm Response Notify control center, change camera settings, command other devices, email notification with snapshot, save video or snapshot to local storage, upload video or snapshot to FTP
Interface
Local Storage microSDHC/SDXC memory card slot
Integration
Unified Solution Fully compatible with ACTi software
ISV Integration Software Development Kit (SDK) available
ONVIF-compliant
GPS Positioning: Manual setting
Firmware Access Browser Microsoft Internet Explorer 8.0 or newer (full functionality)
Safari with QuickTime installed, and other browsers with VLC installed (partial functionality)
General
Power Source PoE Class 2 (IEEE 802.3af)
Power Consumption 3.552 W
Mount Type Wall, Ceiling
Starting Temperature 14 to 122°F / -10 to 50°C
Operating Temperature 14 to 122°F / -10 to 50°C
Operating Humidity 10 to 85% RH
Approvals CE (EN 55022 Class B, EN 55024), FCC (Part15 Subpart B Class B), UL (for optional PoE injector)
Dimensions 3.8 x 3.8 x 1.8" / 9.7 x 9.7 x 4.6 cm
Weight 8.5 oz / 241.0 g