4x1 HDMI Quad Screen Multi-Viewer & Seamless Switcher Product Image

4x1 HDMI Quad Screen Multi-Viewer & Seamless Switcher


Product Description

Simultaneously view or switch between four HDMI sources with this 4x1 HDMI Quad Screen Multi-Viewer & Seamless Switcher from A-Neuvideo. Whether you operate this device as a switcher or as a multiviewer, you can extend the output signal up to 250' by connecting the internal UTP extender and included receiver with a separately available Ethernet cable. Multiview can be operated in quad-view or picture-in-picture modes. Once you have your sources and display set up, use the front panel buttons, included IR remote control, or RS-232 connection to control the device. IR communication between device and display can be carried bi-directionally using the included IR transmitters and receivers.
Interfaces
Input Connectors 4 x HDMI Female
Embedded Audio Input
Output Connectors 1 x HDMI
1 x RCA
1 x RJ45
1 x TOSLINK (S/PDIF)
Other I/O 1 x 1/8" / 3.5 mm IR
1 x DE-9/DB-9 RS-232
4 x 1/8" / 3.5 mm IR
Standards
Video Standard Compliance
Re-Clocking
HDR Compatibility
HDCP Support
EDID Support
Audio Decoding DTS Digital Surround, Dolby Digital, PCM
Transmission
Max Transmission Distance 1080p at 60 Hz:
250' / 76.2 m (via Cat 6a/7)
Video Format HDMI (4:2:2 RGB, YCC)
1080p: 24/30/50/60 fps
1080i: 50/60 fps
720p: 50/60 fps
480p: 60 fps
NTSC: 50 fps
PC Resolutions
Audio Format
Audio Channels 7.1-Channel
Bandwidth 165 MHz
Gain
Differential Gain
Differential Phase
Impedance
Jitter
Max Sample Rate/Resolution
Maximum Data Rate
Signal-to-Noise Ratio
Total Harmonic Distortion (THD)
Signal Level
Return Loss
Installed Operating System
OS Compatibility
GPU
Total Installed Capacity
Total Installed Memory
Memory Configuration
Memory Type
ECC Memory
Memory Slot Type
Power Supply
Power
Power Connector
Power Consumption Power Supply: 12 VDC at 2.5 A (10 W)
ESD Protection �8 kV Air-Gap Discharge
�4 kV Contact Discharge
Environmental
Operating Temperature 32 to 104°F / 0 to 40°C
Storage Temperature -4 to 140°F / -20 to 60°C
Operating Humidity 20 to 90%
Storage Humidity
General
Rack Form Factor 1 RU
Certifications
Maximum Multiple Display Configuration
LED Indicators
Material of Construction Metal
Mean Time Between Failures (MTBF)
Dimensions 9.8 x 4.6 x 1.3" / 32.0 x 25.0 x 11.8 cm
Weight 1.7 lb / 750 g
Warranty Length