Yamaha TF-Rack Digital Mixing Console
Product Description
The Yamaha TF-Rack is a rack-mountable digital audio mixing console that features a touchscreen display - and is expandable up to 40 input channels by adding the optional Tio1608-D I/O rack Ideal for a multitude of live sound reinforcement scenarios - the TF-Rack can also be used for live recording - offering 34x34 channel digital recording and playback via USB 20 using a computer and your preferred DAW software - and 2x2 channel recording and playback using any USB storage device The TF-Rack console itself provides 16 analog XLR/TRS combo mic/line inputs with 48V phantom power - as well as an analog RCA stereo line input - and 16 analog XLR outputs Each combo input channel features a recallable D-PRE microphone preamp - as well EQ and two dynamics processors In addition - the console offers eight powerful FX processors with patches ranging from reverb and delay - to modulation effects such as flanger and chorus - to utility processing like 3-band multi-band compression The TF-Rack ships with Steinberg's Nuendo Live for advanced multi-tracking and virtual sound check capabilities
Features: 16 Analog XLR/TRS Combo Mic/Line Inputs, Analog RCA Stereo Line Input, 16 Analog Outputs (8-XLR & 8-TRS), Per-Channel EQ / Comp & 8 FX Processors, Includes Steinberg's Nuendo Live, Expandable Up to 40 Input Channels, 34x34 Recording to Computer via USB 2.0, Optional Tio1608-D I/O Rack, Recallable D-PRE Microphone Preamps
Mixer: Input Channels: 40 (32 mono + 2 stereo + 2 return) Aux Buses: 20 (8 mono + 6 stereo) Stereo Buses: 1 Sub Buses: 1 Input Channel Functions: 8 DCA Groups
I/O: Inputs: 16 mic/line (XLR/TRS combo) + 1 stereo line (RCA pin) Outputs: 16 (XLR) Expansion Slots: 1
DSP: 8 effects + 10 GEQ
USB: 34 x 34 USB audio interface - 2-track recording via USB storage device
Sampling Frequency: 48 kHz - internal
Signal Delay: Less than 2.6 ms - Input to Omni Out - Fs=48 kHz
Total Harmonic Distortion: Less than 0.05% 20 Hz - 20 kHz @ +4 dBu into 600 Ohms - Input to Omni Out - input gain = min. (measured with a -18 dB/octave filter @ 80 kHz)
Frequency Response: +0.5 - -1.5 dB 20 Hz - 20 kHz - refer to +4 dBu output @ 1 kHz - Input to Omni Out
Dynamic Range: 110 dB typ. - DA converter - 108 dB typ. - Input to Omni Out - input gain = min
Noise: Equivalent Input Noise: -128 dBu typ. - input gain = max. (measured with an A-weight filter) Residual Output Noise: -85 dBu - ST master off (measured with an A-weight filter)
Crosstalk: -100 dB (measured with a -30 dB/octave filter @ 22 kHz) - adjacent Input/Omni Out channels - input gain = min
Power Requirements: 100 - 240 VAC 50/60 Hz
Power Consumption: 85 W
Analog Inputs: Input Terminals: Input 1-16 - ST In 1 - 2 Gain: -6 dB / +66 dB (Input 1-16) Load Impedance: 7.5 kOhms (Input 1-16); 10 kOhms (ST In 1 - 2) For Use with Nominal: 50 - 600-Ohm mics or 600-Ohm lines (Input 1-16); 600-Ohm lines (ST In 1 - 2) Sensitivity
Analog Outputs: Output Terminals: Omni Out 1-16 - Phones Source Impedance: 75 Ohms (Omni Out 1-16); 100 Ohms (Phones) For Use with Nominal: 600-Ohm lines (Omni Out 1-16); 40 Ohms (Phones) GAIN SW: +24 dBu position (default) (Omni Out 1-16) Nominal Output Level: +4
Digital Input/Output: Terminals: USB (to Host) - iPad Format: USB Data length 24-bit (USB to Host) Audio: 34-ch input / 34-ch output - PCM (USB to Host); Playback: MP3 or WAV file data / Record: WAV file data (iPad) Connector: USB (B-type) (USB to Host); USB (A-type) (i
Control I/O: Terminals: Network - Foot SW Format: IEEE802.3 (Network) Level: 10Base-T/100Base-TX (Network) Connector: RJ-45 (Network); TS Phone (Foot SW)
Dimensions: 18.9 x 5.2 x 16.1-inch / 48.0 x 13.2 x 40.9 cm
Net Weight: 20.3 lb / 9.2 kg
