AVENTAGE RX-A2080 9.2-Channel Network A/V Receiver Product Image

AVENTAGE RX-A2080 9.2-Channel Network A/V Receiver


Product Description

Enjoy immersive multi-channel sound with the Yamaha AVENTAGE RX-A2080 9.2-Channel Network A/V Receiver. It delivers up to 140W of power per channel at 8 Ohms and features Dolby Atmos and DTS:X compatibility for object-based audio support. Built-in Bluetooth and AirPlay support allows the receiver to wirelessly stream music from compatible sources, such as smartphones and tablets, while Yamaha's Compressed Music Enhancer helps to deliver optimized sound quality.

Onboard Wi-Fi and Ethernet connectivity allows the AVENTAGE RX-A2080 to access music from your connected computer or NAS. Amazon Alexa compatibility enables you to control certain functions of the receiver with just your voice through your Alexa-enabled devices. With seven HDMI inputs and three outputs, this receiver can act as a video switcher for your HD source components. It will pass through HDR UHD 4K signals and will upscale non-UHD signals to near-4K quality for enhanced viewing of lower-resolution sources when paired with a UHD display. The receiver also has a USB port for accessing media stored on USB flash drives. YPAO-RSC multipoint sound optimization will calibrate the receiver to your speakers and room setup for a tailored listening experience.
Amplifier
Channels 9.2
Amplifier Class
Power Output per Channel 2-Channel Driven:
140 W at 8 Ohms / 20 Hz to 20 kHz / 0.06% THD
155 W at 6 Ohms / 1 kHz / 0.9% THD
1-Channel Driven:
250 W at 6 Ohms / 1 kHz / 10% THD
Dynamic Power per Channel 165 W at 8 Ohms (Front)
210 W at 6 Ohms (Front)
285 W at 4 Ohms (Front)
405 W at 2 Ohms (Front)
Frequency Response
THD+N
Speaker Impedance
Tone Control
Damping Factor
Audio Processing
DTS Compatibility DTS-HD Master Audio, DTS:X
Dolby Compatibility Dolby Atmos, Dolby Digital Plus, Dolby TrueHD
Auro 3D Support No
Upmixing Technology Dolby Surround
Supported File Formats 11.2 MHz DSD, AAC, AIFF, ALAC, FLAC, MP3, WAV, WMA
DAC
Video
HDR Compatibility HDR10, Dolby Vision, Hybrid Log Gamma
Pass-Through Support 4K60p 4:4:4 (BT.2020)
Upscaling 4K UHD
GUI
Connectivity
Rear A/V Inputs 7 x HDMI
3 x Optical TOSLINK
3 x Digital Coaxial
2 x 3RCA Component
4 x RCA Composite
7 x Stereo RCA
1 x Stereo RCA (Phono) with Ground Screw
Rear A/V Outputs 3 x HDMI
2 x RCA Subwoofer Pre-Out
1 x Stereo RCA Zone 2 Pre-Out
1 x Stereo RCA Zone 3 Pre-Out
1 x 7-Channel RCA Pre-Out
Front I/O 1 x 1/4" / 6.35 mm Headphone Output
1 x USB Type-A
1 x 1/8" / 3.5 mm Setup Mic Input
1 x Stereo RCA Input
Other Rear I/O 1 x FM Antenna Terminal
1 x AM Antenna Terminal
2 x Bluetooth/Wi-Fi Antenna Terminal
1 x RJ45 (Ethernet)
2 x 1/8" / 3.5 mm (12 V Trigger) Output
1 x 1/8" / 3.5 mm (Remote) Input
1 x 1/8" / 3.5 mm (Remote) Output
1 x DE-9 (RS-232C)
Speaker Connectors 11 x Binding Post Pairs
HDCP Support Version 2.2
HDMI Compression Modes
Audio Return Channel (ARC) Yes
HDMI CEC Yes
Media Card Slot
A/B Speaker Selection
Bi-Amp Capability
Input Impedance
Input Sensitivity
Rated Output / Impedance
Dynamic Range
Signal to Noise Ratio
Total Harmonic Distortion (THD)
Wireless Connectivity
Wi-Fi Yes
Wireless Security
Bluetooth Yes
Bluetooth Profiles
Supported Audio Codecs AAC, SBC
Bluetooth Range
Wireless Audio Protocols AirPlay
DLNA Support
External Control Support
Virtual Assistant Support
Tuner Section
Tuner Type AM, FM
Number of Tuner Presets
Radio Frequencies
Sensitivity
Signal to Noise Ratio
Distortion
Power
AC Input Power
Power Consumption Standby: 0.1 W
Physical
Dimensions (W x H x D) 17.1 x 7.5 x 18.6" / 43.5 x 19.1 x 47.3 cm (Antenna Removed)
17.1 x 10.6 x 18.6" / 43.5 x 27.0 x 47.3 cm (Antenna Up)
Weight 37.5 lb / 17 kg
Warranty Length Limited 3-Year Warranty