AT-LP60XHP Stereo Turntable with Headphones (Gunmetal & Black)
Product Description
Enjoy your favorite 33 1/3 and 45 rpm vinyl records privately or with your stereo system with the gunmetal & black Audio-Technica AT-LP60XHP Stereo Turntable. It includes a pair of over-ear, closed-back headphones and has a headphone output with a volume control, plus built-in switchable preamplifier, allowing you to also connect directly to your stereo system or speakers of choice via RCA cables. A removable dust cover, RCA to 1/8" audio cable, and 45 rpm adapter are also included.
| Turntable | |
| Motor | DC Servo-Controlled Belt-Drive |
| Speeds | 33 1/3, 45 rpm |
| Tonearm Type | Straight |
| Signal to Noise Ratio | >50 dB (DIN-B) |
| Wow and Flutter | <0.25% (WTD) @ 3 kHz (JIS) |
| Connectors | 1 x Stereo RCA Phono / Line Pair Out (Switchable Preamplifier) 1 x 1/8" / 3.5 mm Headphone Out |
| Gain | Phono Preamp: 36 dB Nominal, RIAA Equalized |
| Output Level | Phono: 2.5 mV Nominal at 1 kHz, 5 cm/sec Line: 150 mV Nominal at 1 kHz, 5 cm/sec |
| Turntable Platter | Die-Cast Aluminum |
| Cartridge | Dual-Magnet |
| Stylus Material | Diamond |
| Replacement Stylus | ATN3600L |
| Power Requirements | 120 VAC, 60 Hz, 3 W |
| Dimensions (W x H x D) | 14.15 x 3.84 x 14.7" / 359.5 x 97.5 x 373.3 mm |
| Weight | Not Specified by Manufacturer |
| Headphones | |
| Type | Over-Ear, Closed-Back, Dynamic |
| Driver Diameter | 1.58" / 40 mm |
| Frequency Response | 18 Hz to 22 kHz |
| Maximum Input Power | 500 mW |
| Sensitivity | 102 dB/mW |
| Impedance | 43 Ohms |
| Connector | 1 x 1/8" / 3.5 mm Stereo |
| Cable Length | 11.5' / 3.5 m |
| Dimensions | Not Specified by Manufacturer |
| Weight | 3.4 oz / 97 g Without Cable |