Roadbuddy 10 HS B5 Battery-Powered Bluetooth 10" Speaker with Bodypack and Headset Microphone Product Image

Roadbuddy 10 HS B5 Battery-Powered Bluetooth 10" Speaker with Bodypack and Headset Microphone


Product Description

For special events, presentations, fitness instruction, and more, the LD Systems Roadbuddy 10 HS Battery-Powered Bluetooth Speaker with Bodypack and Headset Microphone delivers versatility and power in a portable package. The two-way speaker system consists of a 10" custom woofer and a 1" horn-loaded compression driver driven by 480W of Class-D amplification. With powering methods including an internal 8-hour rechargeable battery and an efficient switching power supply, the Roadbuddy 10 HS is ready for the road.

The Roadbuddy 10 HS features a headset microphone, a wireless bodypack transmitter, and a built-in UHF receiver, forming a reliable wireless system that operates in the 584 to 607 MHz frequency band. The integrated media player incorporates a backlit multifunction display, mode and transport buttons, and support for an array of music sources such as 3.5mm or RCA inputs, wireless streaming via Bluetooth, an SD card, or a USB flash drive. The included IR remote control provides comprehensive access to volume, EQ, track selection, and more. The onboard mixer also offers two XLR-1/4" combo jacks that are switchable for mic or line level, per-channel volume controls, 2-band EQ, echo, and master volume. The Roadbuddy 10 HS is easily transportable, thanks to built-in caster wheels and a pull-out handle. On the top, there is a handy storage compartment for up to two handheld microphones. The Roadbuddy's polypropylene cabinet is durable, lightweight, and stand mountable.

Portable PA System
Speaker Configuration 1 x 2-Way Loudspeaker
Number of Input Channels 3 (2 x Mono, 1 x Stereo)
Amplifier Power Rating 120 W RMS
480 W Peak
Amplifier Class Class-D
Impedance
Speakers
Enclosure Type Bass-Reflex
Full-Range Driver
Full-Range Driver (Oval)
HF Driver 1" / 2.5 cm Horn-Loaded Compression Driver
HF Voice Coil
MF Driver
MF Voice Coil
LF Driver 10" / 25.4 cm Woofer
LF Voice Coil
Subwoofer Driver
Subwoofer Voice Coil
Magnet Ferrite
Speaker Sensitivity 96 dB
Signal Processing
Crossover
Input Pad
EQ HF Shelf
LF Shelf
Semi-Parametric EQ
Effects Echo (Type Unspecified)
DSP
Filters
Dynamic Processing
Microphone
Form Factor Headworn
Capsule
Polar Pattern
Output Connector TA3/Mini XLR Female
Operating Voltage
Microphone Sensitivity
Muting
Performance
Frequency Response Wireless:
50 Hz to 17 kHz
Speaker:
55 Hz to 18 kHz
Frequency Range
Maximum SPL 115 dB
Max Coverage Distance
Max Coverage Area
Coverage Angle
Coverage Angle
Input Sensitivity
Gain Range
Max Input Level
I/O Impedance
SNR
THD 0.002%
Dynamic Range
Protections Overcurrent, Short Circuit
Connectivity
Audio I/O 1 x 1/4" TS Unbalanced Line Output
2 x Combo XLR-1/4" TRS Balanced/Unbalanced Mic/Line Input
1 x 1/8" / 3.5 mm TRS Unbalanced Line Input
1 x Stereo RCA Line Input
Phantom Power
USB USB Type-A (Media Playback)
Media Playback 1 x SD
Media & File Formats Supported MP3, WAV, WMA
Network I/O
Wireless Connectivity
Wireless
Wireless Transmission Bodypack Transmitter:
Analog UHF
Max Wireless Range
Number of RF Channels 16
RF Frequency Band 584 to 607 MHz
RF Bandwidth
Form Factor Transmitter:
1 x Bodypack
RF Output Power 10 mW
Transmitter I/O 1 x TA3/Mini XLR 3-Pin Male Input
Max Number of Simultaneous Transmitters
Diversity
Antenna Receiver:
TNC (Rear-Mount)
Squelch
Approximate RF Sensitivity
Deviation
Modulation FM
RF Channel Crosstalk
Spurious
Bluetooth
Bluetooth
Bluetooth Profiles
Pairing Manual
Bluetooth Channel
Frequency
Bluetooth Power Class
Bluetooth Input Gain
Transmitter Power
Bluetooth Range 32.8' / 10 m
Power
Battery Type System:
2 x Rechargeable 12 V Lead-Acid
Bodypack Transmitter:
2 x AA (Not Included)
Approximate Battery Life 8 Hours
Battery Charging Time 10 Hours
Internal Battery Capacity 5 Ah
Battery Cycle Count
AC Input Power 100 to 240 VAC, 50 / 60 Hz 
Power Adapter Output
Current Consumption
Power Consumption
DC Input Power
AC Power Connector 1 x IEC Input
Physical
Cable Length
Transport Options 2 x Wheels (Bottom)
1 x Telescopic Handle (Top)
1 x Handle (Top)
Mounting 1.4" / 35.56 mm Pole Socket
Stand Height
Stand Load Capacity
Cooling
Construction Material ABS, Polypropylene
IP Rating
Operating Temperature 32 to 122°F / 0 to 50°C
Storage Temperature
Operating Humidity 10 to 70% (Recommended)
Certifications
Dimensions 20.67 x 16.34 x 12.91" / 525 x 415 x 328 mm
Weight Bodypack Transmitter:
2.82 oz / 0.08 kg (without Batteries)
System:
36.4 lb / 16.5 kg
Warranty Length Limited 2-Year Warranty