AVR-X1600H 7.2-Channel Network A/V Receiver
Product Description
Enjoy immersive multi-channel sound with the Denon AVR-X1600H 7.2-Channel Network A/V Receiver. It delivers up to 80W of power at 8 Ohms and features Dolby Atmos and DTS:X compatibility for object-based audio support. Built-in Bluetooth and AirPlay 2 support allows the receiver to wirelessly stream music from compatible sources, such as smartphones and tablets. Onboard Wi-Fi and Ethernet connectivity enables the AVR-X1600H to access a variety of internet-based music sources. The receiver can be controlled via, and integrated into, your Google Assistant, Amazon Alexa, or Apple Siri ecosystem.
With six HDMI inputs and one HDMI output, this receiver can act as a video switcher for your HD source components. It will pass through 4K signals along with HDR10, HLG, and Dolby Vision HDR formats. The receiver also has a USB port for accessing media stored on compatible USB flash drives. The Denon Setup Assistant will appear on your HDMI-connected display to help you through the setup process.
With six HDMI inputs and one HDMI output, this receiver can act as a video switcher for your HD source components. It will pass through 4K signals along with HDR10, HLG, and Dolby Vision HDR formats. The receiver also has a USB port for accessing media stored on compatible USB flash drives. The Denon Setup Assistant will appear on your HDMI-connected display to help you through the setup process.
| Amplifier | |
| Channels | 7.2 Object-Based Configuration: 5.2.2 |
| Amplifier Class | |
| Power Output per Channel | 2-Channel Driven: 80 W at 8 Ohms / 20 Hz to 20 kHz / 0.08% THD 120 W at 6 Ohms / 1 kHz / 0.7% THD |
| Dynamic Power per Channel | |
| Frequency Response | 10 Hz to 100 kHz +1/-3 dB (Direct Mode) |
| THD+N | |
| Speaker Impedance | 4 to 16 Ohms |
| Tone Control | |
| Damping Factor | |
| Audio Processing | |
| DTS Compatibility | DTS:X |
| Dolby Compatibility | Dolby Atmos |
| Auro 3D Support | No |
| Upmixing Technology | DTS Virtual:X |
| Supported File Formats | |
| DAC | |
| Video | |
| HDR Compatibility | HDR10, Dolby Vision, Hybrid Log Gamma |
| Pass-Through Support | 4K60p 4:4:4 (BT.2020) |
| Upscaling | |
| GUI | |
| Connectivity | |
| Rear A/V Inputs | 5 x HDMI 2 x Optical TOSLINK 1 x Digital Coaxial 2 x RCA Composite 3 x Stereo RCA (Phono) with Ground Screw |
| Rear A/V Outputs | 1 x HDMI 1 x RCA Composite 2 x RCA Subwoofer Pre-Out 1 x Stereo RCA Zone 2 Pre-Out |
| Front I/O | 1 x 1/4" / 6.35 mm Headphone Output 1 x USB Type-A 1 x 1/8" / 3.5 mm Setup Mic Input 1 x HDMI |
| Other Rear I/O | 1 x FM Antenna Terminal 1 x AM Antenna Terminal 1 x RJ45 (Ethernet) Input 1 x 1/8" / 3.5 mm (IR) Input |
| Speaker Connectors | 7 x Binding Post Pairs |
| HDCP Support | Version 2.2 |
| HDMI Compression Modes | |
| Audio Return Channel (ARC) | |
| HDMI CEC | Yes |
| Media Card Slot | |
| A/B Speaker Selection | |
| Bi-Amp Capability | |
| Input Impedance | 47 Kilohms |
| Input Sensitivity | 200 mV |
| Rated Output / Impedance | |
| Dynamic Range | |
| Signal to Noise Ratio | 98 dB (A-Weighted / Direct Mode) |
| Total Harmonic Distortion (THD) | |
| Wireless Connectivity | |
| Wi-Fi | Yes |
| Wireless Security | |
| Bluetooth | Yes |
| Bluetooth Profiles | |
| Supported Audio Codecs | |
| Bluetooth Range | |
| Wireless Audio Protocols | AirPlay 2 |
| DLNA Support | |
| External Control Support | |
| Virtual Assistant Support | |
| Tuner Section | |
| Tuner Type | AM, FM |
| Number of Tuner Presets | |
| Radio Frequencies | AM: 520 to 1611 kHz FM: 87.5 to 108 MHz |
| Sensitivity | |
| Signal to Noise Ratio | |
| Distortion | |
| Power | |
| AC Input Power | 120 VAC, 60 Hz |
| Power Consumption | Active: 430 W No Sound (ECO On): 29 W No Sound: 39 W Standby: 0.1 W CEC Standby: 0.5 W |
| Physical | |
| Dimensions (W x H x D) | 17.1 x 6.0 x 13.3" / 434.3 x 152.4 x 337.8 mm |
| Weight | 19 lb / 8.6 kg |
| Warranty Length | Limited 3-Year Warranty |