MAS-A100 IP-Based Ceiling Beamforming Microphone Product Image

MAS-A100 IP-Based Ceiling Beamforming Microphone

Product Description

The Sony MAS-A100 is an IP-based beamforming microphone designed to provide clear audio for both speech reinforcement and recording in corporate meetings, lectures, and presentations. The microphone is simply affixed to the ceiling and ready to use, saving you the inconvenience of setting up a lavalier mic or holding a handheld mic.

The beamforming technology provides a pickup pattern that changes with the location of the sound source, allowing the presenter to move around while maintaining consistent sound quality, great for hands-free presentations.

With Dante networking capability, the MAS-A100 can be integrated into existing A/V setups and used with a wide range of products supporting the Dante digital audio-over-IP networking standard including interfaces, switches, mixing consoles, and more. Power over Ethernet (PoE) enables installation and power management with a single network cable.

The MAS-A100 has two output channels. One for speech reinforcement (with a PA system required) and one for simultaneous recording. The dedicated recording channel provides a wider capture range and optimal intelligibility, allowing for crisp recordings that include not only the speaker's voice but also the students or participants.

Frequency Response 100 Hz to 10 kHz
Sensitivity 0 dBFS/Pa at 1 kHz
Maximum SPL 94 dB SPL
Signal to Noise Ratio 75 dB (A-weighted, 1 kHz, 1 Pa)
Self Noise 19 dB SPL (A-weighted)
Dynamic Range <75 dB
Latency 24 ms (Not Including Dante Latency)
Dante Channel Count: 2 Channels (Main, Rec) with Dante
Sampling Rate: 48 kHz
Bit Depth: 24-Bit
Audio Interface: Dante, AES67
Networking Cable Requirements: Cat5e UTP or Higher
Connector Type: RJ45
Audio Technologies Beamforming
Feedback Reducer
Automatic Gain Control
Noise Reduction
Noise Gate
Automatic Calibration with Test Signal
API For External Control System
Performance Maximum Noise Suppression: 18 dB
Maximum Feedback Suppression: 32 dB
Configuration Mic Gain (Output Volume): -60 to +12 dB
Capture Range: Narrow / Standard / Wide
Feedback Reduction: Low / Middle / High
Noise Reduction: Low / Middle / High
Noise Gate: Off / Low / Middle / High
Equalizer: Fixed 5-band, �12 dB (1 dB Step)
Power Requirements Power over Ethernet (PoE), Class 0
Power Consumption 13 W (Maximum), 9 W at 77°F / 25°C (Typical)
Control Control Browser for MAS-A100 Software: Google Chrome
Operating Temperature Range 32 to 104°F / 0 to 40°C
Dimensions (Ø x H) 9.4 x 2" / 240 x 50 mm
Weight 2.2 lb / 1 kg (Main Unit Only)
2.9 lb / 1.3 kg (with Ceiling Plate)