PowerBuds True Wireless In-Ear Sport Headphones (Dynamic Black)
Product Description
Monitor your heart rate as you work out with the PowerBuds True Wireless In-Ear Sport Headphones from Amazfit. PPG sensors in the earbuds provide heart rate monitor as you exercise. Set a heart rate limit in the Amazfit mobile app and the PowerBuds will give you voice notifications when you push yourself too hard. The PowerBuds sport headphones can handle even the toughest workouts with IP55-rated sweat and water resistance, and magnetic ear hooks that keep them in place.
Your favorite music and podcasts are pumped through 9mm drivers with a composite diaphragm. The PowerBuds can play audio continuously for up to 8 hours on a full charge. Snap them into the included charging case for an additional 16 hours of power. As you listen, you can engage Motion Beat mode to boost the bass or Thru Mode to increase the volume of ambient noise, such as traffic or announcements.
Your favorite music and podcasts are pumped through 9mm drivers with a composite diaphragm. The PowerBuds can play audio continuously for up to 8 hours on a full charge. Snap them into the included charging case for an additional 16 hours of power. As you listen, you can engage Motion Beat mode to boost the bass or Thru Mode to increase the volume of ambient noise, such as traffic or announcements.
| Item Type | |
| Number of Included Headphones/Receivers | |
| Number of Included Transmitters | |
| Number of Included Headsets | |
| Number of Included Transceivers | |
| Headphone | |
| Earpiece Design | In-Ear (Intra-Aural) |
| Earpiece Swivel | |
| Earpiece Connection / Wearing Style | |
| Foldable | |
| Number of Earpieces | |
| Sound Field | |
| Earpad Size | |
| Driver Type | Dynamic |
| Number of Drivers | |
| Driver Size | 0.35" / 9 mm |
| Diaphragm | |
| Magnet Type | |
| Voice Coil | |
| Impedance | 16 Ohms |
| Active Noise Cancellation | No |
| Controls/Microphone Location | Controls: Earpiece (Side Unspecified) Microphone: Earpiece (Side Unspecified) |
| Full Remote OS Support | Android, iOS |
| Sensors | Heart Rate, Proximity, Touch |
| Contact Pressure | |
| Performance | |
| Frequency Response | 20 Hz to 20 kHz (Wireless) |
| Resonant Frequency | |
| Sensitivity | |
| Matching Tolerance | |
| Maximum Sound Pressure Level (SPL) | |
| Maximum Power Handling | |
| Functional Bias Voltage | |
| Electrostatic Capacitance | |
| Output Power | 400 mV |
| Volume Limiting | |
| Noise Attenuation | |
| Total Harmonic Distortion (THD) | |
| SNR | |
| CMRR | |
| Channel Separation | |
| Storage Capacity | |
| Microphone | |
| Number of Mics | 2 |
| Beamforming Support | |
| Type | |
| Diaphragm Size | |
| Mic Boom Location | |
| Pickup Pattern | |
| Noise Canceling | |
| Frequency Response | |
| Operating Voltage | |
| Sensitivity | |
| Maximum SPL | |
| Impedance | |
| SNR | |
| Distortion | |
| Equivalent Noise Level | |
| Wireless Connectivity | |
| Wireless Transmission | |
| Number of RF Channels | |
| RF Bandwidth | |
| Max Systems per Setup | |
| Wireless Modulation | |
| DECT Standard | |
| Duplex Mode | |
| RF Channel Access Method | |
| Latency | |
| Speech Encoding | |
| Transmission Speed | |
| Approximate RF Sensitivity | |
| Supported Audio Codecs | AAC, SBC, mSBC |
| Bluetooth Profiles | |
| Bluetooth | 5.0 + LE |
| Bluetooth Power Class | |
| Wireless Range | |
| Frequency | |
| Transmitter Power | |
| Multipoint Support | |
| Maximum Paired Devices | |
| NFC | |
| Wireless Chipset | |
| Transmitter Host Connection | |
| Encryption | |
| Audio Connector to Source | |
| Connector Plating | |
| Adapter (Included) | |
| Cable Design | |
| Audio Connector to Earpiece | |
| Cable Length | |
| Cable Length | |
| Cable Color | |
| Cable Conductor Material | |
| Battery | |
| Battery Type | |
| Battery Type | |
| Battery Chemistry | |
| Battery Chemistry | |
| Capacity (mAh) | 55 mAh |
| Runtime | 8 Hours (BT) |
| Runtime | |
| Quick Charging Times | 15 Minutes for 3 Hours |
| Recharge Time | |
| DC Input Power | 5 VDC at 0.12 A |
| Wireless Charging | |
| Charging Port | Pins |
| Charging Cable Length | |
| Number of Channels | |
| Users per System | |
| I/O Connectors | |
| Antenna | |
| Audio Decoding | |
| Number of Charging Ports | |
| AC/DC Power Adapter | |
| AC Input Power | |
| Power Consumption | |
| Charging Case | |
| Additional Runtime | 16 Hours |
| Battery Chemistry | |
| Capacity | 450 mAh |
| Charging Time | |
| Charging Interface | USB Type-C |
| Platform Support | |
| OS Compatibility | |
| Required Hardware | |
| Internet Connection | |
| Environmental | |
| Charging Temperature | |
| Operating Temperature | 32 to 113°F / 0 to 45°C |
| Storage Temperature | |
| Operating Humidity | |
| Storage Humidity | |
| Certifications | |
| Physical | |
| Color | |
| Water Resistance | Resistant |
| IP Rating | IP55 |
| LED Indicator | Yes |
| Material of Construction | |
| Dimensions | |
| Weight | Headphones: 0.2 oz / 6 g (Each) Charging Case/Headphones: 2.4 oz / 69 g |
| Warranty Length | Limited 1-Year Warranty |