AVENTAGE RX-A6A 9.2-Channel MusicCast A/V Receiver Product Image

AVENTAGE RX-A6A 9.2-Channel MusicCast A/V Receiver


Product Description

Movie and video game lovers will enjoy immersive multichannel sound with the Yamaha AVENTAGE RX-A6A 9.2-Channel MusicCast A/V Receiver. It delivers up to 150W of power per channel at 8 ohms and features Dolby Atmos and DTS:X compatibility for object-based audio support. Built-in Bluetooth and AirPlay 2 support allows the receiver to wirelessly stream music from compatible sources, such as smartphones and tablets, while Yamaha's Compressed Music Enhancer helps to deliver optimized sound quality.

Onboard Wi-Fi and Ethernet connectivity allows the AVENTAGE RX-A6A to access music from your network or the internet. Amazon Alexa, Google Assistant, and Apple Siri compatibility via your voice assistant-enabled devices on the same network let you control certain functions of the receiver with just your voice. With seven HDMI inputs and three outputs, this receiver can act as a video switcher for your HD source components. It will pass through HDR 4K UHD signals for enhanced viewing of compatible content when paired with a compatible display. YPAO R.S.C. multipoint sound optimization calibrates the receiver to your speakers and room setup for a tailored listening experience.
Amplifier
Channels 9.2
Amplifier Class
Power Output per Channel 2-Channel Driven:
150 W at 8 Ohms / 20 Hz to 20 kHz / 0.06% THD
165 W at 8 Ohms / 1 kHz / 0.09% THD
1-Channel Driven:
185 W at 8 Ohms / 1 kHz / 0.9% THD
200 W at 6 Ohms / 1 kHz / 0.9% THD
230 W at 4 Ohms / 1 kHz / 0.9% THD
Dynamic Power per Channel
Frequency Response 10 Hz to 100 kHz +0/-3 dB (Direct, Pure Mode)
THD+N
Speaker Impedance 4 to 8 Ohms
Tone Control Bass (50 Hz): ±6.0 dB
Treble (20 kHz): ±6.0 dB
Damping Factor > 120
Audio Processing
DTS Compatibility DTS, DTS-HD High Resolution, DTS-HD Master Audio, DTS:X
Dolby Compatibility Dolby Atmos, Dolby Digital, Dolby Digital Plus, Dolby TrueHD
Auro 3D Support No
Upmixing Technology DTS Neural:X, Dolby Atmos Height Virtualization Technology
Supported File Formats 11.2 MHz DSD, 2.8 MHz DSD, 5.6 MHz DSD, AAC, AIFF, ALAC, FLAC, MP3, WAV, WMA
DAC 384 kHz / 32-Bit (ESS SABRE ES9026PRO)
Video
HDR Compatibility HDR10, Dolby Vision, Hybrid Log Gamma
Pass-Through Support 4K60p
Upscaling None
GUI Yes
Connectivity
Rear A/V Inputs 7 x HDMI 2.1
1 x 3RCA Component
2 x RCA Composite
3 x Optical TOSLINK
2 x Digital Coaxial
1 x Stereo XLR
5 x Stereo RCA
1 x Stereo RCA (Phono) with Ground Screw
Rear A/V Outputs 3 x HDMI 2.1
1 x Stereo XLR Pre-Out
1 x 11-Channel RCA Pre-Out
1 x Stereo RCA Zone 2
1 x Stereo RCA Zone 3
2 x RCA Subwoofer
Front I/O 1 x USB Type-A
1 x 1/4" / 6.35 mm Headphone Output
1 x 1/8" / 3.5 mm Setup Mic Input
Other Rear I/O 1 x FM Antenna Terminal Input
1 x AM Antenna Terminal Input
2 x Bluetooth/Wi-Fi Antenna Terminal
2 x 1/8" / 3.5 mm (12 V Trigger) Output
1 x 1/8" / 3.5 mm (Remote) Input
1 x 1/8" / 3.5 mm (Remote) Output
1 x RJ45 (Ethernet)
Speaker Connectors 11 x Binding Post Pairs
HDCP Support Version 2.3
HDMI Compression Modes Not Specified by Manufacturer
Audio Return Channel (ARC) ARC, eARC
HDMI CEC Yes
Media Card Slot None
A/B Speaker Selection
Bi-Amp Capability Yes
Input Impedance Phono: 47 Kilohms
RCA: 47 Kilohms
XLR: 200 Kilohms
Input Sensitivity Phono: 4.5 mV
RCA: 250 mV
XLR (Attenuator Off): 260 mV
XLR (Attenuator On): 520 mV
Rated Output / Impedance Pre-Out, Subwoofer Pre-Out: 1 V / 470 Ohms
Zone 2 Line-Out, Zone 3 Line-Out: 470 mV / 470 Ohms
Analog: 2 V / 470 Ohms
Dynamic Range
Signal to Noise Ratio Phono: 95 dB (Direct Mode / IHF-A)
Pre-Amp: 110 dB (Direct Mode / IHF-A)
Total Harmonic Distortion (THD)
Wireless Connectivity
Wi-Fi Wi-Fi 5 (802.11ac); Dual-Band (2.4 & 5 GHz)
Wireless Security AES, WEP, WPA2-PSK
Bluetooth 4.2
Bluetooth Profiles A2DP, AVRCP
Supported Audio Codecs AAC, SBC
Bluetooth Range 32.8' / 10 m
Wireless Audio Protocols AirPlay 2, MusicCast
DLNA Support
Control
External Control Support
Virtual Assistant Support Amazon Alexa, Apple Siri, Google Assistant
Tuner Section
Tuner Type AM, FM
Number of Tuner Presets FM: 40 Stations
Radio Frequencies AM: 530 to 1710 kHz
FM: 87.5 to 107.9 MHz
Sensitivity FM Mono at 50 dB: 3 µV / 20.8 dBf
Signal to Noise Ratio FM:
68 dB (Stereo)
69 dB (Mono)
Distortion
Power
AC Input Power 120 VAC, 60 Hz
Power Consumption Active: 500 W
CEC Standby: 1.9 W
Network Standby: 1.8 W
Bluetooth Standby: 1.7 W
Standby: 0.4 W
Physical
Dimensions (W x H x D) 17.1 x 7.6 x 17.4" / 43.5 x 19.2 x 44.2 cm
17.1 x 10.7 x 17.4" / 43.5 x 27.1 x 44.2 cm (Antenna Up)
Weight 41.2 lb / 18.7 kg
Warranty Length Limited 3-Year Warranty